B074QMW51C
August 28, 2017  |  Tools

#3: Brush Air Cooling Spindle Motor PCB Engraver Spindle, PWM Motor Regulator, Fixed Seat 48V 3.175mm ER11 500W
classic space

Brush Air Cooling Spindle Motor PCB Engraver Spindle, PWM Motor Regulator, Fixed Seat 48V 3.175mm ER11 500W

     .


  • to make sure this fits.


  • Can engrave metal or nonmetal


  • Suitable for carving PCB, acrylic, drilling and so on


  • The governor uses a user-friendly terminal, user-friendly flexible wiring, and comes with forced air cooling, you can work for a long time


  • Analog 0-5V control, (unplug the XH2.54-3P potentiometer plug, the signal cable connected to the middle of the XH2.54-3P feet, ground wire XH2.54-3P the right foot)


  • Soft start function to prevent the motor to start the current is too large instantaneous damage with the power supply, (default 0 seconds soft start), 0-5 seconds adjustable

Parameter:
Operating Voltage: DC48V (DC)
Power: 500W
Speed: 12000 RPM
Torque: 550mN.m.
Insulation Resistance: >2 megohms
Insulation Dielectric Strength: 400V
Diameter: 52mm high-grade black matte body
Chuck Part Length: Arbor part 35mm, (including nut and sandwich 43mm)
Chuck Part Diameter: 16mm
Total Length of Motor: 201mm (including clamping part and motor)
Spindle Weight: 1.1KG
Fixed Seat Weight: 0.35KG
Spindle Radial Runout: 0.01-0.04

Parameter(PWM):
Operating Voltage: Wide voltage (DC) DC12V-DC60V (limit 65V)
Control Mode: The default potentiometer control (5K-100K feasible) default value of 10K
MACH3 interface terminal support external PWM signal input control speed, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, for MACH3 spindle control speed, (Note that the external PWM signal control need to unplug XH2 .54-3P potentiometer plug control to take effect, otherwise it can not control)
Rated Current: 12A, overload short circuit protection current 15A. (Overcurrent cut-off output, overcurrent indicator flashes, potentiometer return indicator is off, overcurrent protection is released)
Control Power: 12V140W, 24V280W, 36V400W, 48V550W, 60V700W
Size: 75x75x42mm (including copper column height, copper pillar height 6mm)
Pulse Width Modulation Range: 0% -100%

Includes:
1 x 500W ER11 Engraver Spindle
1 x PWM Controller
1 x Fixed Seat

Fast shipping with DHL/EMS/FEDEX/UPS

Product information

Product Warranty: For warranty information about this product, please click here

Would you like to tell us about a lower price?

GET MORE DETAILS HERE


Comments are closed.

Copyright © 2019 · Classic Space | Powered by Wifi DSLR Camera