Taking pictures

All things space. Also things not space.

Taking pictures

Postby Grist » Fri Apr 27, 2012 4:32 am

So, I joined a short while ago having got back into Lego after a long time away. I've been working on something fairly big, which is why you haven't seen a single MOC from me yet, but it's nearly finished and I have a little something to show off in the meantime. With that in mind, what tips can you guys give me for taking good pictures?
Posts: 3
Joined: Wed Feb 15, 2012 8:19 am

Re: Taking pictures

Postby KDog » Fri Apr 27, 2012 8:29 am

Use your camera's Macro setting. It'll allow you to get in close and get detailed, focused pictures.
Posts: 222
Joined: Tue Jul 20, 2010 12:52 pm

Re: Taking pictures

Postby Strange Animal » Sat Apr 28, 2012 10:43 am

I use a program called Photomatix and do HDR to get better quality out of my crap camera and as Kdog said use marcro setting.HDR is when you take photos form high exposure to low exposure usually 3 but for even better quality you can do more.Photomatix can be free or paid for the free version you have a water mark on the photo.

User avatar
Strange Animal
Posts: 232
Joined: Tue Sep 06, 2011 6:53 pm

Re: Taking pictures

Postby Blake » Sat Apr 28, 2012 1:28 pm

Since nearly everything I build is huge, I can probably offer some tips:

First and foremost, use a tripod. This is the single most important tip I can think of. I use a Gorillapod. It can get low to the ground when necessary, and yet it's sturdy enough to support a DSLR camera with a heavy zoom lens. When I need something higher, it easily attaches to the back of a chair.

A tripod will give you several benefits:
- You can use a longer exposure. It's very hard to hold a camera still in your hand. It's a lot easier on a tripod. That means you can use a longer exposure without getting motion blur. A tripod works even better if your camera has a self timer. Pressing the shutter jiggles the camera. With a short delay, the camera will be still when it takes the picture.
- You can use a smaller aperture. The smaller the aperture, the larger the depth of field. If your depth of field is too small, parts of the scene will be out of focus. Sometimes you want that to draw attention to part of the scene, but with MOCs, most of us probably want the whole thing in focus.
- You can use a lower ISO speed. The lower the ISO speed, the more light it takes to register an image. That may sound bad at first glance, but lower sensitivity means higher signal-to-noise ratio in your image. If the camera is super-sensitive, a little noise will have a larger effect. Lower ISO = less noise.

Typically, I first set the ISO speed and aperture to get a clear image, and then tweak the exposure.

Tip number 2: Use good lighting. Bright daylight is great. When that's not available, I use a cheap reflector lamp with a 100 Watt light bulb. DO NOT USE YOUR CAMERA'S FLASH--you'll get better photos without it. If the scene is too dark, find another source of light or use a longer exposure.

Tip number 3: Don't use a cluttered background. I use poster-board. For large MOCs, you may need multiple sheets. I usually just Photoshop out the background, because even with poster board, you can see seams and the shadow of the MOC itself.

Tip number 4: Post-processing. I work some photoshop magic on every photo I take. This may include:
- Adjusting brightness/contrast
- Adjusting the color balance.
- Sharpening the image
- Removing unwanted specular reflection
- As I mentioned already, removing the background. (For this, I use a layer mask, because I can easily restore the edges of the MOC if I'm overzealous.
- Occasionally, I've even corrected small problems in the MOC itself (for example if a part has been knocked slightly out of place).

Tip number 5: If your camera supports it, use auto exposure-bracketing. With this setting, your camera will take three images at three different exposures every time you press the shutter. Then you can pick the one you like best.

Tip number 6: Use a good camera. It doesn't have to be super-fancy--a decent point-and-shoot camera is fine. It should at least let you tweak the exposure/aperture/ISO speed.
User avatar
Site Admin
Posts: 170
Joined: Fri Jul 16, 2010 5:28 am
Location: New York City

Return to Space.

Who is online

Users browsing this forum: No registered users and 1 guest