VEVOR MD40 Magnetic Drill Press 1-1 2″ Boring and 2700 Lbs Magnet Magnetic Drilling System
June 4, 2017  |  Classic

#1: VEVOR MD40 Magnetic Drill Press 1-1 2″ Boring and 2700 Lbs Magnet Magnetic Drilling System


classic space

VEVOR MD40 Magnetic Drill Press 1-1 2" Boring and 2700 Lbs Magnet Magnetic Drilling System

     .


  • to make sure this fits.


  • Magnetic drill press suitable for drilling on any metal surface


  • Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 16 A


  • Max Magnetic Force: 2,700 lbs. (12,000 N),tool Holder: 3/4-inch weldon shank;spindle Speed: 670 RPM


  • Maximum Boring Depth: 7-1/2 in;Maximum Boring Diameter: 1-1/2 in. (40 mm)


  • MD41 magnetic drilling system suitable for drilling on any metal surface,thinner metal will result in less force

Color:MD40

MD40 Magnetic Drill Press with 1-1/2″ Boring Diameter & 2700lb Magnetic Force

The MD40 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs. of max force and ensures the machine will not move during the drilling process. A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.

Specifications:

Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A

Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.

Maximum Boring Diameter: 1-1/2 in. (40 mm)

Maximum Boring Depth: 7-1/2 in.

Tool Holder: 3/4-inch Weldon Shank

Spindle Speed: 670 RPM

Overall Weight: 30 lbs.

Usage:

Applicable to steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power, drilling rig, power construction, railway manufacturing etc.

Magnetic drill maintenance:

Caution:

1, Magnetic drill should be stored in a dry, clean, no corrosive gases and where children can not touch.

2, Save every part in the demolition of magnetic drill and when assembly it is good to put in the original parts.

3, Magnetic drill parts should be often injected into the lubricating oil and keep clean.

4, Magnetic drill maintenance should always be checked regularly, must check the power lines, plugs etc.

Product information

Color:MD40

Product Warranty: For warranty information about this product, please click here

Would you like to tell us about a lower price?

GET MORE DETAILS HERE


Comments are closed.

Copyright © 2017 · Classic Space | Powered by WordPress