B076F4LDN6

As far as installation goes, this AIO was fairly easy. Instructions were simple enough to follow, if you ever installed a cpu cooler. The RGB lighting is A+ and fans are a nice touch given their price when sold seperately. I gave this product 4 stars for one reason. The performance is not upto par with the results I’ve seen while doing research before purchasing.

I installed this cooler on an I7-4790k running at 4.4Ghz and 1.12 volts, which could be considered low for this chip. For thermal paste I went with Artic MX-4 which also had really good reviews. The radiator is mounted in the top of my NZXT 410 case and fits well as long as you mount the fans inside the case and the radatior on the top(or outside of the metal framing, under the removable top piece).Of course this all depends on your Mobo and other components.

Now maybe my expectations were too high or maybe I’m fussing over some minor temps, but hear me out. Most reviewers (youtube or digital magazines) of this AIO were seeing idle temps at 25 degrees C with the same chip on average. When under 100% load MOST reviewers were seeing temps sub 50 degrees. With ambient temperatures around 22 or 23 I am actually getting idle temps between 31-34 (5-10% CPU usage). Which is only a 2-3 degree difference from the cooler master Hyper Evo 212 air cooler I replaced. Using Aida64, I was seeing temps spike at about 75 degrees but settle out around low 70’s or the high 60’s. Overall not bad by any means, but not what I was anticipating. I also have two 120mm fans in the front of case acting as my largest intake. One 120mm fan on the side panel as an additional intake and one 120mm exhaust fan on the back of the case.

The good news is when playing GTA V, using the GeForce optimal settings for a 4k monitor, with an Strix 1070 OC edition, my max temp has hit 60 degrees but only for a second and the temps usually hover around 52-55 which is about 10 degrees lowers from the air cooler. So that was a plus and the reason I gave this cooler 4 stars instead of 3.

I also tested the response of the pump and fans to ensure the unit was working properly before made this review and they seem to be working fine. No strange noises, the pump only gurgled after the initial installation.After 4 test of reseating the cooler and going from using the Artic MX-4 TIM and the TIM included with the AIO I was not able to see any improvement as far as my temps go. Which led to my dissapoitment. i have also tested the pump and fans at 100% which give me the lower temps when running Aida 64.

Overall it is a decent cooler and will keep your CPU from hitting TJMaxx very easily. The price point is really hard to turn down compared to the competition, especially when you look at the cost of the fans individually. If you bought two of these fans for case fans and bought the hyper evo 212, you would roughly be paying the same price as you would for this cooler as of this writing.

I would reccomend this cooler for budget builds and people new to water cooling, they will be extremely satisfied with their purchase.

Good but would have been nice to know the mounting bracket required the original for AMD motherboards. It comes with all the parts for intel boards. Ordered because old fan was to heavy and broke the original bracket hence purchasing new one. Glad I had already ordered a new bracket because I didn’t know if I wanted to leave this on or move it to another PC. Product wise it is awesome and quiet as a mouse in comparison to my 5Lb thermaltake that was on. LEDs are easy to operate but it is an inline switch and can’t be mounted on outside of case without considerable modification but would still have two wires coming out.

Looks very nice. Rgb looks very nice. The directions are illustrated and VERY hard to follow. It took me a long time to figure out how to install the thing. There are no arrows on the fan. Which way does it blow? Figure it out the hard way I guess. And I did. I was more upset with the radiator than anything else. It’s larger than the fan. This means tgat all the slots where I wanted to put it, it won’t fit. I had to put the fan I first and the rad on top. So then I fire it up and hear rrrrrrrrrrrrrrrr. The fan vibrates at different tones with speed. I can’t say this is my best purchase. But it does do the job. Temps stay right where they should under a load.

So first one I received had a bad rgb control, amazon quickly got another one one the way. Nice colors in the fan and water block, cools the FX8350 in my son’s pc wonderful. Cool and no issues running 4500mhz with 2133 ram settings @stock voltage. I like it so much I ditched my old air cooler and got the non rgb version for my ryzen build

Got this for my daughters computer and it has been great. Very quiet and the CPU temps are staying low given the room temp. Lots of options for putting it on whatever CPU you have.
Knocked one star off for the stiff liquid pipes. Had to move it around a couple times to get everything to fit right

I used this in a Cooler Master Elite 110 case for a mini ITX computer built around AMD’s Athlon x4 880k. Even with a 400MHz overclock on the CPU the cooler keeps the CPU with 30+ C’ thermal margin in a tiny case crammed with a 550W power supply, a Radeon RX 470, a 3.5″ HDD, and a 2.5″ SSD, all while playing Assassin’s Creed: Origins. The fan is quiet and seems to have good airflow. No regrets!

Kept temperatures about the same if not a degree or two cooler (29-31 idle). 3770K OC to 4.4Ghz Id previously had a GIGANTIC Scythe radiator/fan and seeing as this takes up 1/10 the space it was the main reason I switched.

had to customize this to make it work in my dell optiplex 960mt but it works great i love it. had to custom cut a piece of plexiglass to over lap the motor and do a lil hard wiring but im happy with it…just got done stress testing my pc and im pleased <3