28” Propane Fire Pit Table with 50,000 BTU Auto-Ignition Gas Fire Pit, Outdoor Rattan & Wicker-Look Square Fire Table with Lid, ETL Approved,Adjustab…
classic space

28'' Propane Fire Pit Table with 50,000 BTU Auto-Ignition Gas Fire Pit, Outdoor Rattan & Wicker-Look Square Fire Table with Lid, ETL Approved,Adjustable Flame,Black

    This fits your .

  • Make sure this fits
    by entering your model number.

  • 50,000 BTU High Heat Output

  • ETL Certification Approval

  • Auto-Ignition Fire Pit

  • Rattan-Look Coffee Table

  • Romantic Fire Pit & Table — The 28” square fire table will become a coffee table or dinning table when you put its lid in place. And the fire table will become a fire pit, which can offer the enough heat to make you feel warm in the winter

  • Smokeless Fire — The fire pit table uses the liquid propane fuel, which can provide the stable and clean combustion, so there is not any ash or smoke to plague you or pollute environment

  • Quality Material — The square table is made of durable steel material to prevent it from cracking. The burner and control panel, made of stainless steel for the longer serving time, are fitted with an externally integrated push and steering ignition for easy adjustment of the flame and simple switching control

This gas fire pit is primarily used for the heating of outdoor patios, decks,spas,pools and open working areas.

Gentle Tips:

  • Please read the user manual carefully before installing and using it.
  • It comes without the standard 20 lb propane tank (Not Included).
  • Allow at least 45 minutes for the fire pit to cool down after use, then disconnect and remove the cylinder.

Lighting Instructions

  • Make sure control knob is in the “OFF”position.
  • Turn LP cylinder gas valve to fully open position.
  • Press down control knob, turn it counter clockwise to “MAX” position and hold it for 5 seconds, which will light the burner. (You will hear 1 clicking noise.)
  • If the burner is not lit immediately (within 5 seconds), press down the control knob and turn clockwise to “OFF” position, repeat from step 3 after 5 minutes.
  • When burner is lit, turn the control knob to desired heat output position between “MAX” and “MIN”.

3 Checks if fire pit failed to light

1. Please check whether electrode wire is inserted into the hole of the safety valve, and make sure that insert it to transfer the electric spark to the burner head and ignite the gas.

2. Please check whether the ignition needle is in place: remove the ignition covering, align the ignition needle with the air hole, and adjust the distance between the needle and the air hole to 3mm.

3.Please check whether the gas in the cylinder is running out. If the gas in the cylinder is almost used up, the gas pressure in the bottle will decrease, and the amount of gas delivered to the burner will not be enough, the fire pit will not be lit, so the tank or gas cylinders need be replaced.

Product information

Product Warranty: For warranty information about this product, please click here

Reviewed in the United States on August 28, 2021

Customer image

5.0 out of 5 stars

Propane fire pit

By Joseph A. Giambalvo on August 28, 2021

Very easy to assemble, just need a philips head screwdriver. Works great. Got the propane tank at ACE hardware.

Images in this review

Customer imageCustomer image