BAHU HT230 25.6cc 2-Cycle Gas Powered Hedge Trimmers 24.8-Inch Double-Sided Shrub Trimmer/Red
classic space

BAHU HT230 25.6cc 2-Cycle Gas Powered Hedge Trimmers 24.8-Inch Double-Sided Shrub Trimmer/Red

    This fits your .

  • Make sure this fits
    by entering your model number.


  • 25.6cc commercial grade 2-cycle gas hedge trimmer,24.8 inch blade is made of alloy tool steel, which comes with excellent hardness and toughness.


  • Dual-sided serrated blades cut swaths up to 25.6″ wide.


  • BAHU Gas Powered Hedge Trimmers designed of D-type auxiliary and handle minimize strain on the arms and backs, provide greater comfort for users.


  • The drive design makes the transmission part compact and the transmission efficiency high. It can be quickly and easily trimmed in a short time.


  • Gas Powered Bush Trimmer machine gives you 100% Satisfaction Guarantee, we can reship or refund if there are any non-artificial quality problems when receiving the machine

BAHU Gasoline Hedge Trimmer, 25.6CC 2-Stroke Gas Powered Hedge Trimmers 24.8 Inch Dual Sided Shrub Trimmer for Garden and Lawn Care.

Higher displacement provides suitable power match for demanding rental, industrial, construction and professional landscape applications

Lightweight, compact design

Provides easy starting and good fuel efficiency 

Offers power-to-weight ratio matched to leading two-stroke models

Valvetrain parts installed inside oil chamber, low noise and low vibration enables powering of more applications

Maximum output of 1.47 kW (1.97 hp) and weight of 4.72 kg (10.4 lbs.)

Complies with most stringent environmental regulations, including EPA Phase III/CARB Tier III/EU Stage V

Automatic decompressor provides easy start by reducing pulling force on recoil rope

Condensed, compact design with long, vertical lines

Attachments and connectors share integrated, slanted shape

360 degrees inclinable, allowing operation and storage in any position

A wide, scratch-resistant area with protruding edges that provides stability and serves to protect the engine cowling in upside down positions during maintenance intervals.

HOW TO START A COLD ENGINE

1. put the machine on the ground.

2. Push primer bulb 4-5 times.

3. Open the choke.

4. Pulling the starter handle 1-4 times until the machine warm up.

5. Chock off.

6. Pulling the starter handle again until the machine start(max 10times).

NOTE:

Add gasoline and engine oil respectively,cover and shake evenly.

Mixng ratio 25:1(Gasoline:Engine oil)

No.92 gasoline must be used Two stork oil must be used.

Product information

Product Warranty: For warranty information about this product, please click here

GET MORE DETAILS HERE