Cutting Edge Power CEP Fortress Waterproof MPPT Solar Generator Battery Box with Inverter, USB, 12V. None (100Ah SLA)
classic space

Cutting Edge Power CEP Fortress Waterproof MPPT Solar Generator Battery Box with Inverter, USB, 12V. None (100Ah SLA)

    This fits your .

  • Make sure this fits
    by entering your model number.


  • “Waterproof Solar Generator with a 2000W No Inverter + (1) 100Ah SLA battery”


  • The Cutting Edge Power FORTRESS is ready to protect your equipment with its waterproof and vandal resistant design! Perfect for permanent installations like trailers, boats, boat docks, etc.


  • Featuring a plug and play concept, the Fortress solar generator can be purchased with a battery, or you can use your own 12V battery


  • Assembled in USA, Enclosure made in USA.Professionally wired in Houston, TX, all you need to do is connect the 5/16″ battery ring terminals.


  • This device can also be used with 4S 12.8V lithium iron phosphate LiFePO4 batteries.

Material Type:100Ah SLA

With inverter options up to 2000W, this solar generator can provide some serious power. All connections are made inside the box. Cable entry/exit can be made through dedicated cutouts on all four sides so NO DRILLING IS REQUIRED.

As with all waterproof electronic designs, heat can become an issue – Especially with a black box in the sun! But Cutting Edge Power has you covered with a temperature controlled fan that will cool off the internal components without draining the battery.Features:Heavy duty industrial grade MPPT charge controller, capable of handling up to 520W of solar panel input (260W @ 12V DC / 520W @ 24V DC).Pre-wired and ready to go: 5/16″ ring battery terminals / MC4 Solar Panel connectors. No crimping, splicing, extra wiring needed.Cable entry/exit points on all four sides.Padlock latch to lock the box closedBuilt-in short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection.12V Socket with 30A circuit breaker.Perfect for marine, boat dock, trailer, or any long term outdoor application.Premium marine grade 200°C rated silicone insulated wire.Enclosure built for rugged environments with an impact resistance down to -20°F, and unaffected by acid, gas, oil, as well as, UV exposure.Specifications:Maximum solar panel voltage input: 92V DC (@25C ambient). Maximum solar panel current input: 20ACharge controller environmental rating: IP68Battery voltage (if equipped): 12V DCBattery chemistry (if equipped): SLA Deep CycleBattery capacity (if equipped): 100AhInverter voltage (if equipped): 110/120VACCharge controller working temperature: -35°C to 55°C (-31°F to 131°F)Enclosure internal dimensions: 21.0″ L x 11.8” W x 10.3” HEnclosure external dimensions: 23.75″L x 12.50″W x 13.38″

Product information

Material Type:100Ah SLA

GET MORE DETAILS HERE