to make sure this fits.
Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
Pivoting Fence allows you to create angled mortises from 0-90Â° with positive stops at 22.5Â°, 45Â°, 67.5Â°.
Indexing pins for quick alignment against the edge of the workpiece for accurate placement.
Dust extractable design provides clean mortise holes for better glue adhesion and longer cutter life.
Combination set includes: Domino DF 500-Plus Joiner, DOMINO cutter D 5mm, Support Bracket, Operating Tool, Trim Stop, Cross Stop, Plug-It Power Cord, and T-LOC Systainer #2 storage container.
You can make flawless mortises every single time, thanks to Festool’s new Domino joining system! Joining no longer has to be a slow, difficult process. The Domino Joiner, with its revolutionary cutting method, utilizes a patented mortising technique, simple indexing features, and adjustable mortise sizing to make flawless mortises. Powerful 420 watt motor drives the cutter spindle at 23,400 RPM.
Precise positioning and accurate mortising with the viewing window. Use 1 of 3 mortise width adjustments for perfectly fitting joints and fast assembly; easy to adjust while the jointer is operating. Cut long mortises in an instant thanks to the simultaneous turning and oscillating movement without kickback. 11/16″ dust port extracts up to 95% of chips generated when used in conjunction with any one of Festool’s vacuum systems. Retractable stop pins for quick and precise positioning of the initial domino tenon on both work pieces. Five catch positions at 0, 22.5, 45, 67.5, and 90 degrees, as well as infinitely variable mortising angles from 0 to 90 degrees.
Simple, precise mortising fence height adjustment (with scale) offers accurate stops for locating mortising opening in the center of material thicknesses: 16, 20, 22, 25, 28, and 40mm. Quick, precise adjustment for 5 different mortising depths. Robust inner mechanism for consistently accurate routing results. Works on everything from face frames and work pieces as small as 1″ x 5/8″, to large projects and heavy furniture. Uses pre-fabricated, solid beech domino tenons for superior strength.
From the Manufacturer
Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, Beech and Sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive – it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength. The unique, patented cutting mechanism consists of a spiral cutter with carbide tip that oscillates as it rotates to create perfect mortises time after time. This action creates a clean entry for a perfectly flush surface while preventing heat build up in the tooling for long cutter life. The Domino joiner is a simple tool to use with angle, depth and height adjustment scales with positive stops for repeated work and accurate indexing. The included stop pins allow for consistent indexing against the workpiece edge which is critical for perfect alignment when joining panels. Create precise, solid joints for your largest or smallest projects. The Domino is portable and ergonomic and lets you take the tool to the work for precise joint placement. The adjustable fence for mitered and beveled joints ranges from 0 to 90º with positive stops at 22.5, 45, 67.5, and 90º. Straightforward adjustments for mortise width and depth, and material height. An available range of tenon sizes and types for maximum joint stability across many different applications. The Domino system is above all economical and efficient. The fast, easy alignment and repeatability of accurate mortises dramatically reduces set-up time and enhances your quality of work. The set version includes additional Festool accessories Trim Stop for registering on narrow pieces and Cross Stop for repeat mortise indexing. Made in Germany.
|Item Weight||13.3 pounds|
|Product Dimensions||15.5 x 11.5 x 6.4 inches|
|Item model number||574432|
|Color||Black heavy duty long fiber plastic and metal|
|Item Package Quantity||1|
|Warranty Description||3-Year Limited Warranty|
83 customer reviews
4.5 out of 5 stars
|Best Sellers Rank||
#29,891 in Tools & Home Improvement (See top 100)
|Shipping Weight||13.3 pounds (View shipping rates and policies)|
|Date First Available||March 19, 2011|
Manufacturerâs warranty can be requested from customer service. Click here to make a request to customer service.