GREDIA 1/4″ Water Flow Sensor Food-Grade Switch Hall Effect Flowmeter Fluid Meter Counter Connect Hosepipe 0.3-6L/min
classic space

GREDIA 1/4" Water Flow Sensor Food-Grade Switch Hall Effect Flowmeter Fluid Meter Counter Connect Hosepipe 0.3-6L/min

    This fits your .

  • Make sure this fits
    by entering your model number.


  • Connect to a hosepipe whose inner diameter is about 5 to 7 mm( G1/4 inch connector)


  • Flow range:0.3-6L/min, Water Pressure: ≤0.8Mpa


  • Working voltage: DC 5-24 V, F=(98*Q)±3%, Q=L/Min


  • Material: food grade plastic, all raw materials conform to the ROHS test standard


  • Wide application: It is mainly used in water heater, coffee machine, water purifier, drinking fountain, beverage machine, campus smart card equipment, etc.

Size:G1/4″ hosepipe

Our products are fine made with nice materials and good workmanship, strict quality control, guarantee in after service.

The flowmeter is light and handy, easy to install. The sealing ring make the connection firm, the sealing performance is good and the problem of water leakage is avoided.

More details about the flow meter:
F=(98*Q)±3%, Q=L/Min, error: ±3%
Working range: 0.3-6L/min
Working voltage: DC 5-24 V
Water Pressure: ≤0.8Mpa
Liquid temperature: 0-100℃
Maximum current consumptiont: 10 mA(DC 5V)
Size: 58mm x 34mm x 26mm(L*W*H)
Wire length: 15 cm
Refer to the wiring:
Red wire: VCC(+)
Black wire: GND(-)
Yellow wire: Signal output

Package:
1 x G1/4 inch flowmeter connect hosepipe

GET MORE DETAILS HERE