Haier Fridge Not Working But Freezer Is

haier fridge not working but freezer is

If your Haier fridge is not cooling properly, it may be due to a malfunctioning thermostat. The thermostat contains a temperature sensor and a relay, which detect the temperature inside the refrigerator and instruct the compressor to start working when the temperature increases. When this occurs, the compressor does not work, and the freezer may not function properly.

Troubleshooting a faulty evaporator fan

A faulty evaporator fan in a Haier fridge can be caused by a number of factors. The fan motor could be damaged, have a faulty wiring connection, or have a faulty start relay. Check the motor for continuity, and if necessary, replace the motor. Another cause of a faulty evaporator fan is a damaged inverter module, which regulates the cooling system.

If you notice that the refrigerator is making a loud racket, it’s likely the evaporator fan is causing the problem. If the fan is noisy, you can check to see if it’s stuck or has been damaged. If it is, remove the cover and replace it.

A faulty evaporator fan may also cause a refrigerator to not cool properly. If this happens, replace the fan motor. The evaporator fan is responsible for drawing cold air over the evaporator coils in the freezer. If the fan motor is broken, the freezer won’t cool at all. You can check the fan motor by manually turning the blade. If it sounds unusually loud or doesn’t turn on at all, check the continuity of the motor. If this doesn’t help, check the evaporator motor with a multimeter to determine if it’s still in good working order.

Checking the thermostat

If your refrigerator’s ice maker or water dispenser is not working, you may need to replace the thermistor. First, you must remove the door seal and flatten the fridge so that you can access the thermostat. Once the door seal is removed, remove the screws holding it in place. You can also remove the plastic door cap and inspect the thermostat itself by inserting a multimeter into its terminals.

The thermostat of a Haier fridge is the control that allows you to regulate the cold and warm temperature of the refrigerator. When it fails to do so, the cooling coils can freeze. In such a case, you should get it repaired or replaced by a Haier fridge repair expert.

Checking the thermostat of a Haier refrigerator can save you money and energy. Depending on the temperature and humidity of your home, the fridge will run longer than usual. It will take up to a full day to reach the temperature that you want it to be. In order to save on energy, make sure the temperature is at least two degrees higher than the ambient temperature.

Checking the start capacitor

To check the start capacitor of a Haier fridge, the first step is to turn off the power to the appliance. If the appliance doesn’t work, the control board is likely defective. Fortunately, this isn’t a common problem. If you are unsure, you can use a multimeter to check it.

The start capacitor is a crucial component of your refrigerator. If the capacitor is weak, your refrigerator will not cool properly. This can damage the unit lining or even cause the refrigerator to overheat. To fix the problem, you can either replace the capacitor or check the start relay.

A defective start capacitor will cause the compressor to not start properly or cause it to hum. You can check the start capacitor by unscrewing the back panel, removing the back panel and checking the capacitor’s capacitance with a meter. If it is faulty, you must replace it immediately.

Checking the compressor

The compressor is responsible for the cooling of a Haier fridge. It compresses and circulates the refrigerant through the evaporator and condenser coils. If the refrigerator doesn’t cool, the compressor may not be working properly. Luckily, this problem is rarely a life-threatening one. If you suspect the compressor may be failing, it is best to seek professional help.

To check the compressor, start by turning the thermostat from low to high. If you hear an audible click when you rotate it, the thermostat is functioning properly. Otherwise, use a multimeter to test for continuity. If you’re unable to hear any click, the compressor may be faulty.

A compressor issue is not a life-threatening problem, but it can cause a refrigerator to overheat and not produce as much cold air as it should. If this occurs, you may need to take the appliance to a repair service centre. You may also be eligible for a rebate program that will cover the cost of the repair.

Available for Amazon Prime