Haier Mini Fridge Parts Freezer Door Replacements

haier mini fridge parts freezer door

If your freezer door on your Haier fridge is not opening, there are a few different parts you can replace to get your fridge working again. There is the light switch, the capacitor, the Compressor start relay, and the Defrost timer. Getting these parts replaced will allow you to use your fridge again, and will save you money as well.

Repair Clinic stocks all the replacement parts for your Haier fridge

The best part about owning a modern day mini fridge is the fact that you can find all the replacement parts you need at the same time. Not only are you in luck if you’re in the market for a new one, but the repair wizards at your local appliance repair shop will be glad to help you out. And while you’re at it, you’ll be able to get all the work done in record time. Besides, you’ll be able to enjoy your remodeled kitchen all the more.

You’ll be happy to know that your favorite refrigerator will be back in working order in no time, and the price will be right. To get you started, head over to Repair Clinic.com, where you can order the parts and have them shipped to your door for a fraction of the cost of a new unit.

Compressor start relay

The compressor start relay is an important part of your Whirlpool refrigerator. If your compressor doesn’t start, you may need to replace the relay. It is a black plastic component, measuring about one inch by one and a half inches.

There are many different types of relays. Some are merely a plug and play replacement, while others are more complex. To find out which one is right for your appliance, check out the user manual.

Choosing the correct refrigerator start relay for your model can be tricky. Fortunately, Sears PartsDirect has a variety of starter relays for your Haier refrigerator. Plus, you can use their parts diagrams to help you identify the parts you need.

Condenser fan

If your Haier mini fridge parts freezer door condenser fan is making too much noise, it could be a problem. Several things can cause the fan to make this noise, including blocked airflow and a bad relay. There are several ways to resolve the problem.

First, make sure you know what the noise is. You may hear a humming, gurgling, or buzzing. If these sounds are not accompanied by a temperature rise, check the freezer thermostat. Some models have a switch on the frame of the freezer door. This is usually white.

Then, remove the back panel. To access the fan, you will have to take out the evaporator panel. Make sure you have a Phillips head screwdriver.

Defrost timer

If your freezer does not defrost, there are two common reasons. A defective timer or a faulty sensor can cause this problem. Fortunately, it is easy to diagnose and fix this common appliance trouble.

The timer is a device that controls the frequency of the automatic defrost cycle. When it detects that a defrost is in progress, it will switch on the defrost heater to melt the frost off of the evaporator coils. This allows the refrigerant to circulate more freely, improving heat exchange.

A defective defrost sensor can prevent the defrost heater from turning on, so it is important to check the sensor. There is a backup fuse that shuts off the heater when the sensor fails. Alternatively, you can get a replacement sensor.

Light switch

If you have a refrigerator, you probably have a light switch, and you may be wondering how to replace it. It is easy enough to do, as long as you have some tools on hand and a few minutes to spare. First off, disconnect the power supply from your appliance. Next, you will need a small flat-blade screwdriver and some pliers. Once you have these in hand, you are ready to tackle your refrigerator’s most challenging task.

The best part is that repairing your refrigerator should take no more than 15 minutes. This is because you will only need a few of the most basic electrical components.

Run capacitor

The run capacitor is a component in the fridge that keeps the compressor running. If the capacitor fails, the compressor motor may start to burn out. There are several ways to replace the run capacitor. You should be able to repair your refrigerator by following a few simple steps.

First, you must find the correct part. In many cases, the capacitor is a small, cylindrical piece that is located near the compressor. Before you begin, you should make sure that your refrigerator is turned off. Once you have this, you should unplug it and clean the surrounding area.

Next, you’ll want to test the capacitor using a multimeter. This is a small, round device that is used to measure the resistance of two terminals on the relay. You should see a change in the resistance value as the temperature changes.

Available for Amazon Prime