Home Audio Power Amplifier System – 2X120W Mini Dual Channel Mixer Surround Sound Stereo Receiver Box w/ RCA, AUX, Mic Input – For Amplified Speakers, PA, CD Player, Theater – Pyle PTA4

| Electronics

Home Audio Power Amplifier System – 2X120W Mini Dual Channel Mixer Surround Sound Stereo Receiver Box w/ RCA, AUX, Mic Input – For Amplified Speakers, PA, CD Player, Theater – Pyle PTA4

2X120 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic surround sound system. Gives you 2x120W power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
4 INPUTS: This personal digital amp box supports various external sources – 3 pairs RCA audio input for tuner, CD player, tape deck, camcorder or VCR, 1/4″ microphone IN, 1/4″ headphone jack input. Also features a REC output for recording
PAGER/MIXING MODE: The mini integrated indoor AV receiver features pager and mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting and meetings. Switch to mixing mode for a fun karaoke session
PUSH TYPE SPEAKER TERMINAL: The surround sound amplifying mixer device lets you easily connect speaker wires directly to the amplifier. The total speaker impedance must be at least 4 Ohm per channel at stereo mode
EQ CONTROLS: The improved professional compact bookshelf sound amplifier features crisp and responsive button for power switch and rotary knob controls for mic volume, balance, bass, treble, master volume, and input source
2x120W RMS at 4-ohm – Blue LED Output Level Display – Power ON LED Indicator
3.5mm Aux CD/MP3 Input Jack – 1/4” Phone Jack – MIC Volume Control

Product Description

Pyle PTA4 Home Amplifier is perfect for powering any stereo system. Complete with AUX/CD inputs, and 2 x 120 watts of power — this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality — this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.

From the Manufacturer

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores and, at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.

Switchable Mixing (Karaoke) Mode

When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)

Switchable MIC Pager Mode

When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12 dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

.14-Inch AUX-In Jack

The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players, etc.

.25-Inch Phone Jack

Accepts headphones with .25-inch plugs.

.25-Inch Microphone Input Jack

Accepts microphones with .25-inch plugs.

REC RCA Output

Lets you connect the amplifier to a tape deck for recording.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)

Additional Features

Harmonic Distortion: 0.3%
2 x 120 Watt RMS at four Ohms
Blue LED Output Level Display
Frequency Response: 20 Hz-40 kHz
Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
Tone Controls: Bass & Treble: +/-12 dB (100 Hz/10 kHz)
Dimensions: 8.27 x 2.72 x 5.39 inches

Product information

Product Dimensions

7.6 x 4.1 x 9.7 inches

Item Weight

6 pounds

Shipping Weight

10.49 pounds

Manufacturer

Sound Around

ASIN

B003NVN1PY

Shipping Advisory

This item must be shipped separately from other items in your order. Additional shipping charges will not apply.

Item model number

PTA4

Customer Reviews

Best Sellers Rank

#6,249 in Electronics (See Top 100 in Electronics)

#17 in Electronics > Home Audio & Theater > Home Theater > Receivers & Amplifiers > Amplifiers

#124 in Electronics > Home Audio & Theater > Stereo System Components

Date first listed on Amazon

December 19, 2005

Product Warranty: For warranty information about this product, please

click here.

[PDF ]

Would you like to tell us about a lower price?

January 30, 2018

Verified Purchase

It looked good out of the box. Appeared to be solid. I used it for 7 months and then one day, the LEDs were not working and the volume was very low. I checked all the wires and reattached everything. Nothing would fix the problem. So, there is one user-replaceable fuse accessed on the back. I thought I would check the fuse–just in case. It has a slot for a Philips Head screw driver–I inserted the screw driver and turned. It was so tightly closed that when I turned it, it actually ripped the fuse and connections from the inside board. Now, it’s dead.

Conclusion:
1. It only lasted 7 months.
2. I am not sure why the LEDs stopped working.
3. The volume was too low after it started to fail after the 7 months.
4. The one access point to replace something that could go wrong (the fuse) did not work. Trying to open it ripped it apart.
5. I now have to buy a replacement. I could have added the $70 or so from the purchase of this one to a better unit the first time.

Separately, there was a lot of hiss when no sound was playing. This means the hiss is always there–it is just masked at higher volumes.

August 17, 2017

Verified Purchase

Bought the first unit and two months later it would start cutting out. Turning the unit on and off several times worked for a while until it went dead altogether. Bought a second unit because the manufacturer warranty with pyle (not amazon warranty) requires you to pay for shipping there and $20 for a replacement unit and shipping back, which is BS bc I live about 5 miles away from where they ship!! This winds up being just about half or more than half the cost of the unit itself..so might as well buy a new one with amazon warranty. Less than a month later, same issue with it cutting out. My device was kept unobstructed and in a ventilated place, it’s never moved, so it most certainly is not something i am doing. Do not buy. Or if you must, buy the insurance!

April 23, 2017

Verified Purchase

This is the 3rd Pyle amp that I’ve purchased for powering external speakers for my televisions. This is a basic, reasonably priced amp that will do a very nice job of filling your TV room with high quality sound. If you are an audiophile looking for concert hall realism, then this amp isn’t going to do it for you. And remember, at this price range you are not going to get clear, auditorium filling sound. But if you want an inexpensive, basic amplifier to power a set of speakers then this will work just fine.

This amp seems to be designed for use as a PA system – a standard microphone input on the rear. I don’t use this function, but paired with a decent set of speakers would probably make a good announcing system for an event. A plus is that you can mix your music input with the microphone.

My only (minor) complaint is the extremely bright Output Level Display lamps. They are LEDs and flash away like strobe lights.This definitely doesn’t work in a darkened TV room, so you’ll need some way to cover them up.

Several other reviewers have complained about “poor quality”. I don’t know where this complaint comes from. My amp is a solid, fairly hefty piece of equipment. Everything that I can see shows the use of good, commercial quality components.

April 19, 2018

Verified Purchase

This amplifier delivers great power and has all the features that you’re expecting from the description. However, in the first unit that I bought, there was a noticeable, gain-independent hiss coming out of the speakers. This occurred even when the input was disconnected, and the speakers have been attached to other sources and not caused a hiss. Others have noted this hiss as well. Pyle was happy to exchange the amp, but the second one had the same hissing problem. The power and price are on point, but just hope you don’t get one with this hissing problem.

November 29, 2014

Verified Purchase

The Good: No desire for a massive receiver on my desk, this fit the needs I was looking for to connect a good pair of bookshelf speakers to my desktop.
The Bad: I get cross talk between AUX1/AUX2/CD. If I have more than one device connected I have to stop the audio on one before switching to the other, which sort of defeats the point. I don’t expect to necessitate the extra inputs, but it is worth noting for future home audio projects.
The Ugly: The LED’s are way too bright for sitting on my desk. 3 layers of scotch tape and it isn’t as blinding as it was, but I might still move it off to the side where it isn’t in direct line of sight.
Other thoughts: I’m running a pair of 60W speakers and the distortion seems to hit in the bass at roughly the same volume as the original receiver. This isn’t going to make your speakers sound better unless your current receiver isn’t outputting as high as your speakers can go.

June 14, 2016

Verified Purchase

It’s a nice amplifier for use with a home stereo system. I had a $60 Sony combination CD/cassette player that puts out 15 watts per channel. I bought a beautiful pair of second hand Yamaha 3 way speakers that normally retail new for $150 for $19. The new speakers were rated at 70 nominal watts per channel. Although when the new speakers were hooked up to the Sony player with a subwoofer they sounded alright there was some distortion and the speakers simply weren’t living up to what they were capable of. When I attached this amplifier between the Sony player and the Yamaha speakers the speakers sounded like high quality $150 speakers and the subwoofer suddenly came to life.

I only gave this four stars because of the construction of the bare wire speaker interface. It is about the flimsiest construction with tiny holes for the bare speaker wire, cheap springs and poor mounting. I’m using a high quality 14 gauge speaker wire and I had to force the bare speaker wire into the interface holes. If you plan on inserting your speaker wires just once and then leaving them alone it is fine. But if you plan on moving your amplifier and need to frequently connect and disconnect your speaker wire this speaker interface is going to break on you. It won’t hold up with repeated use.

GET MORE DETAILS HERE

Comments are closed.

Product Description

From the Manufacturer

The Ultimate Stereo Power Amplifier

Switchable Mixing (Karaoke) Mode

Switchable MIC Pager Mode

Push Type Speaker Terminals

110/220 Voltage Selector

.14-Inch AUX-In Jack

.25-Inch Phone Jack

.25-Inch Microphone Input Jack

REC RCA Output

Take Control

Replaceable Power Fuse

Additional Features

Product information

Related

Recent Posts

Recent Release