How to Adjust the Tension on a Sun Joe Pole Saw

The Sun Joe pole saw is a very popular tool for those who need to cut tree stumps or other difficult terrain. Its chain can easily be adjusted by simply turning the tensioning screw clockwise or counterclockwise. To adjust the chain tension, make sure that the chain is not hanging down. It should be seated in the guide bar, and it should move freely in its track. If the chain is too tight, it can cause the saw to start buckling, or worse, the operator can be injured.

sun joe pole saw tension screw

When adjusting the tension on the chain of your pole saw, always wear safety gloves and use a putty knife to clean out the guide bar. This will help you get the correct tension adjustment. Different manufacturers sell different models, so you should check and read the manual of the one you are using. Ensure that you read the instructions and follow the directions to the letter. Depending on the model you purchase, you may need to adjust the tension screw on each individual limb.

If the chain is too loose, it will cause your pole saw to perform poorly. It can also cause kickback, which is when the tip of the chainsaw strikes a branch and flies toward the user. Kickback can be extremely dangerous. It can damage the person or property you are cutting. Furthermore, a loose chain will result in slanted cuts. If you are not careful, you can end up causing injuries to yourself or others.

It is recommended to adjust the tension of the pole saw chain with the use of a wrench to prevent any accidental injuries. You must also be sure to follow the instructions on the manual to adjust the tension of the chain to achieve the desired result. If you do not, you may end up with a damaged pole saw. To adjust the tension of the chain, follow the instructions on the pole saw manual carefully. It is important to know how to use the machine as safely as possible.

The tension screw is the most important part of the chain. Without it, the chain cannot run smoothly. The chain is an important component of the pole saw. The tension screw in the pole saw helps the chain to fit in the saw. The tighter the chain is, the better it performs. To adjust the tension of the chain, you must loosen the guide bar nuts. It is important to adjust the chain correctly. If you do not want to use a wrench, loosen the guide bar nuts with a pliers.

The chain tension screw is the most important part of the pole saw. If the chain is too loose, the performance of the pole saw will decrease. The chain will also become unsafe if it is flung from the tree limb. If it is too loose, it will lead to a kickback, which is a dangerous situation. The chain can fly off the guide bar and hit you or someone else. It can also lead to slanted cuts.

It is important to tighten the chain to avoid a kickback. When the chain is too loose, the saw may lose its control and can cause a serious injury. A loose chain can also lead to a slanted cut. Therefore, it is essential to use a saw with a tight tension screw. The chain should not be too loose to be thrown off the pole. If the chain is too loose, it will damage the pole.

It is vital to check the tension of the chain on a pole saw. If the chain is too loose, the saw will not cut properly. It can cause the chain to stretch and cause injury. By tightening the chain tensioning screw, you will ensure the safety of your family and others. You should always wear protective gloves while working with a polesaw, and always read the manual. It will give you step-by-step instructions on how to properly adjust the chain.

Available for Amazon Prime