|  Cell Phones

Lintratek 4G LTE Cell Phone Signal Booster Mobile Signal Amplifier Repeater (Band 4) AWS 1700/2100MHz for AT&T, T-Mobile and Verizon
classic space

Lintratek 4G LTE Cell Phone Signal Booster Mobile Signal Amplifier Repeater Band4 AWS 1700/2100MHz for AT&T, T-Mobile and Verizon

  • 4G LTE SERVICE: (Band 4) uplink 1710-1755MHz; downlink 2110-2155MHz

  • WORKS WITH THESE CARRIERS: AT&T, T-Mobile and Verizon

  • INTELLIGENT LCD: show real time signal strength.

  • COVERAGE AREA: 3500 square feet without barrier.

  • NOTE: Please confirm your 4G frequency before bid, only frequency match then it can works. And there should be a good signal source outside your house.

Lintratek 4G LTE Signal Solution:
1. Before bid, please make sure your mobile frequency is match for BAND 4 (1700Mhz/2100Mhz).
2. This cell phone signal booster can only make the weak signal stronger , it can’t create signal , that’s means it won’t give you any help in an area where there is no signal at all.
3. You should get 4 – 5 bars of stable signal in the location where the outdoor antenna is fixed in.

Specification : Frequency range : UL 1710-1755mhz ; DL 2110-2155mhz
Max. Output Power: 16dBm
Max. Gain (dB):65dBi
I/O Port: N-Female on both ends
Main Power:AC 100-240V, DC 5V 1A
LCD display: to show the real-time boosted signal strength.

Package Contents:
* Cell Phone Signal Booster
* Outdoor Yagi Antenna
* Indoor Ceiling Antenna
* AC Adapter
* 10M(33 ft) Cable
* User Manual Installation

Installation Guide:
1.Check and find a place where your cell phone can receive the best signal outside your house, usually on the roof, or similar high places, then fix the outdoor antenna there, and the outdoor antenna should be pointing to the cell tower’s direction. (The outdoor antenna should not be higher than the lightning rod on top of the building.)
2.Fix the repeater device somewhere inside the house, the repeater should be fixed in a place where is near from the power socket, and have good ventilation.
3. Runs the cable on the outdoor antenna into the house, and connect the antenna cable connector on the OUTDOOR port of the repeater tightly.
4.Tightly connect the indoor panel antenna on the INDOOR port of the repeater.
5.Turn on the power of the repeater.

Attention: The distance between the outdoor and indoor antenna should be above 8 meters(26 feet). And there should be thick obstacles like walls between them to avoid interference.

Product information

Product Warranty: For warranty information about this product, please click here

Would you like to tell us about a lower price?


Comments are closed.

Copyright © 2019 · Classic Space | Powered by Wifi DSLR Camera