â Brighter Lights, Longer Lighting: Our light is equipped with 45 LED to give brighter illumination than similar light at the market. The battery capacity had also been updated to 3.7V 2200Mah to get longer duration. Provide up to 8 hours of continuous solar fully charging for 5-7 hours continuous usage.
â 3 Intelligent Modes for your choice: Strong Light in Motion Sensor Mode; Strong & Dim Light Sensor Mode and Continuous Strong Light Mode! Choose any lighting mode for security lighting at night!
â 2 Simplify Installation Ways: Outdoor Installation – To mount the solar light on the solid wall in seconds with provided wall plug and screws, no cable or wire is need; Suggest to install the solar light at any outdoor place with direct sunshine lighting; Indoor Installation: With 2 pieces of Quality Detachable 3M Sticky Velcro sticked, the light can be took down for outdoor solar charging in need which is also perfectly suitable for indoor lighting.
â To ensure the greatest angle for PIR motion sensor control, the recommended installing height is between 5.5 – 6.5 feet; The light activation range is between 10 – 26 feet at a 120 degree angle, which will be affected by the installation height, the temperature of environment especially in winter.
â Certified to IP65, this solar light is withstand rain and other extreme weather conditions; Prior to first usage, please allow 8 hours of continuous direct solar for fully charging at any modes of the light; Perfect lighting choice for garden, pool, fence, patio, deck, yard, driveway, stairs, outside wall, porch, corridor, closets, stair wall and etc.
Details of 3 Modes Solar Motion Sensor Light:
1. Strong Light in Motion Sensor Mode: At night, the light remains off at all times until people movement is detected. When the people movement is detected, the light will turn itself on to Strong Brightness and Remain for 15 Seconds, and then the light will turn itself off Automatically.
– Note: At daytime when people pass by, the light wonât turn on as its built-in PIR motion sensor could sense the sunlight automatically at daytime to save energy.
2. Strong & Dim Light Sensor Mode: At night, the light will keep in Dim Mode until people movement is detected.
When the people movement is detected, the light will turn itself on to Strong Brightness and Remain for 15 Seconds, and then the light will returns to Dim Mode again. 3. Continuous Strong Light Mode: When the surrounding fades into darkness after sunset, the light will keep in Strong Brightness Lighting until the sunrise.
– Note: At daytime, the light wonât turn on as its built-in PIR motion sensor could sense the sunlight automatically at daytime to save energy. Steps on Wall Installation:
1. Switch and set the lighting mode before wall installation (3 Options).
2. Choose the mounting height between 5.5 to 6.5 feet and drill 2 parallel holes on the wall (85mm distance between 2 holes), and fix the 2 wall plug nuts into holes.
3. Position the light and insert screw into the wall plug nuts; Tighten screws and fix the light on the wall. Package Includes:
– 1 x Solar Motion Sensor Light
– 2 x Detachable 3M Sticky Velcro
– 4 x Screws and Wall Plug Nuts
– 1 x English Instruction
– 12-Months No-Hassle Replacement Warranty
|Item Weight||11 ounces|
|Product Dimensions||7 x 4.8 x 2 inches|
Type of Bulb
Product Warranty: For warranty information about this product, please click here