When shopping for a new refrigerator, it’s important to understand the size and dimensions of the space where the new appliance will be placed. Under cabinet refrigerators are a great option for small spaces, and you can find a unit that fits into a corner or existing cutout in a cabinet. You’ll also need to measure the height of the space in order to make sure the new unit will fit without being too tall or too short.
Counter-depth refrigerators are shallower
Counter-depth refrigerators have a smaller depth than a standard depth model. This shallow depth makes it easier to reach the contents inside, but they can be pricier. These units usually have the same capacity as a standard-depth refrigerator, but the doors may protrude into the countertop or cabinet.
A counter-depth refrigerator can sit flush with a countertop, giving the appearance of a built-in refrigerator. By contrast, a standard-depth refrigerator is deeper, usually up to thirty inches, and can take up more space in a kitchen. It may also stick out a foot or more from the countertop edge.
Counter-depth refrigerators come in a variety of styles. There are French door, side-by-side, bottom-freezer, and top-freezer models. The smaller depth and width of counter-depth refrigerators can make them ideal for small kitchens, as they can fit more in a smaller space.
They can be placed at the end of a row of cabinets
When you are looking for under cabinet refrigerator dimensions, keep in mind that you can place the appliance at the end of a row of cabinets. You should also keep in mind that you need to leave an open space for the door to open. If this space is not available, you can place the appliance on the benchtop. Remember to place a fire blanket and smoke detectors near the appliance for safety. The area around the appliance should be 900mm wide.
When measuring the cutout for an under cabinet refrigerator, you should take note of the height of the refrigerator, the width of its door, and the width of the cabinet’s cutout. This way, you won’t have to worry about the refrigerator not fitting properly. Also, make sure that you have enough room for the additional width of the door, so that it doesn’t jut out into the countertop.
Another consideration when measuring the depth of your refrigerator is the depth of your counter top. Countertops are typically 24 to 25 inches deep, and you will need enough space for the refrigerator to fit underneath the surface. Make sure that you also consider the overall depth of the counter top and any wall behind it. The extra depth is necessary because the refrigerator needs room for the door to swing open.
They are designed to fit into a smaller space
The counter-depth design of an under cabinet refrigerator allows it to sit sunken between two counters, rather than sticking out from the surrounding space. This makes it ideal for kitchens with limited space, and makes it easier to reach the interior of the refrigerator. Counter-depth models also tend to be cheaper than their full-depth counterparts.
Under cabinet refrigerator dimensions are different from full-size ones, so you’ll need to determine how much space the appliance will take up. The most popular configuration is a 36-inch-wide fridge with a 24-inch-wide freezer. Then you’ll need to figure out where you’ll put the unit. Depending on your layout, the unit may have to be placed closer to the wall than you’d like.
They can be installed in an existing cabinet cutout
The basic under cabinet refrigerator dimensions are the same as those of a traditional refrigerator. In most cases, they are a little bit taller. For proper ventilation, make sure that you have a half-inch gap between the bottom of the refrigerator and the wall.
You will need to measure the cutout carefully to make sure that the refrigerator will fit. If you have an existing cabinet cutout, you can put the refrigerator at the end of the row of cabinets. You can use a wider refrigerator, but make sure that it will fit properly. Also, take note of the width of the door with the handle. You should also make sure that the refrigerator is flush with the countertop.
Typically, a refrigerator fits into an area that is 36 inches wide by 72 inches tall. The depth of most cabinets is about 24 inches. If you have a deeper cutout, you can consider removing the adjacent cabinet to make space for the refrigerator. Another option is to purchase a modular cabinet to fill the space.