Why is My Danby Mini Fridge Freezer Not Freezing?

If your Danby mini fridge freezer isn’t freezing anymore, there are a few simple things that you can try to fix the problem. First of all, make sure that you have the freezer function set to cool, not freeze. If it’s set to freeze, turn off the power, open the door, and move the lever to the “cool” setting. Then, wait for the freezer to reach the desired temperature, usually around 0 degrees Fahrenheit.

evaporator fan motor

If your mini fridge freezer is not cooling, it might be time to check the evaporator fan motor. It may be damaged or not functioning. Check the blades to see if they are bent. If they are, you may need to replace them. You may also need to check the thermostat and the cold control device.

If the fan is not working, it may be due to a clogged drain or damaged motor. The evaporator fan may be making a loud clicking or buzzing noise. The freezer may also be running less cold than usual. In some cases, you may also notice water leaking from the defrost drain or frost on the inside of the freezer. You can try to clean the defrost drain using a turkey baster dipped in hot water.

If the problem persists, you may need to replace the evaporator fan motor. The fan motor is located behind the rear panel of the freezer. If it is not running, you will need to open the freezer door and test the fan motor manually.

Temperature control thermostat

If you’ve discovered that your mini fridge is not freezing properly, the problem may be caused by a faulty temperature control thermostat. To fix this problem, you need to remove the back panel from your refrigerator. Then, locate the wiring coming from the thermostat. Once you’ve located them, reconnect them to the new thermostat. Then, you can replace the back panel. Once the refrigerator is working again, you can test the temperature. If the problem persists, you may need to contact a qualified appliance repair technician.

First, you may want to check the freezer’s temperature settings. Your refrigerator has two settings: freezing and cooling. The temperature of the freezer should be between -10 C (-23 F). The recommended range for a freezer is between 4 and 5 degrees Fahrenheit.

Another problem you may have is your freezer’s start relay. If it’s not working properly, the compressor won’t be able to run. Try shaking the freezer physically to test if the relay is working. If the relay rattles, you’ll need to replace it. If it doesn’t rattle, it’s more likely that the compressor is the culprit.

Door seals

If you are experiencing freezing, chances are that the door seals are not functioning properly. This can be caused by a number of reasons, including dust and dirt collecting on the seal. Often, these seals need several cleanings before they function properly. Try using a dry cloth to wipe away any dirt. If the seals still do not seal tightly, you may need to replace them.

If you suspect that the seals are the cause of your freezer not freezing, you can test them by inserting a dollar bill into the freezer and then pulling it out. You should test a few sections to see which ones are causing the freezing problem. If the seals are not preventing the freezer from freezing, it may be blocked by the contents of the freezer. The evaporator fan is located at the rear of the freezer and helps distribute the cold air throughout the freezer.

Another way to fix this problem is to replace the door seals. These seals are made of rubber and can become damaged over time. You can use petroleum jelly or silicone grease to replace these seals. Using these materials will make it easier to push back the rubber.

Control board

If you notice that your Danby mini fridge freezer is not freezing, you may need to check the control board. The control board determines the frequency of defrost cycles. If the board is not working properly, your fridge will not enter a defrost cycle. Check the temperature settings and make sure that the freezer is about two-thirds full.

Another possible cause of your refrigerator not getting cold is the condenser coils. If they are dirty, they cannot effectively dissipate heat. As a result, the refrigerator will have to work harder to cool down. When this happens, the unit will fail to maintain a stable temperature.

Another common cause of a mini fridge not freezing is a broken compressor. This part of the freezer is responsible for compressing the refrigerant and running the compressor. Without the compressor, the freezer will not be able to cool properly. Check the compressor and other parts to make sure they are working properly. If these are not working, you may need to replace the mini fridge. Fortunately, a replacement mini fridge is not that expensive.

Available for Amazon Prime