If your Whirlpool fridge freezer is not freezing properly, you should check its power cord. If the plug is tangled or is loose, it will affect the voltage. It is also essential to make sure that the cord is seated properly in the socket. If you have trouble connecting the power cord to the refrigerator, you can tape it or replace it with a new one. If these methods do not work, the best solution is to replace the power cord. If the power cord is tangled, you can also check the fuse or circuit breaker.
evaporator fan motor
If your refrigerator is not freezing anymore, it could be due to a malfunction of the evaporator fan motor. To diagnose this issue, remove the access panel and locate the fan motor. The motor is located on the inside of the fridge compartment. To remove the evaporator coil, you can either open the freezer or take off the back panel. Next, you should find the motor housing and the electrical connector. You should also remove the fan blade.
If you are having trouble with your evaporator fan, you might have a bad motor or a bad relay. If you notice that your evaporator fan isn’t turning, then it’s time to replace it. You can also use a multimeter to check the motor’s windings for continuity.
Another possible cause of a Whirlpool fridge freezer not freezing is that the evaporator fan motor has failed. This could be a result of a short circuit, a burnt-out motor, or excessive wear and tear on the motor. Using a multimeter, you can check the motor for continuity and noise.
The evaporator fan is the fan that draws air from the cooling coils and spreads it throughout the freezer. A malfunctioning evaporator fan will lead to a malfunctioning freezer.
If your refrigerator keeps freezing up, it is possible that the thermostat has failed. To determine whether this is the problem, you can check the temperature using an appliance thermometer. If it has failed, you’ll need to replace the entire thermostat. If the fridge’s electrical function is still OK, you may be able to unfreeze the contents. If not, you can try increasing the temperature of the refrigerator to defrost the frozen items.
If your freezer continues to run hot, it could also be due to the compressor not working properly. If you find this problem, you should contact a service technician for further assistance. The compressor can’t work properly if it can’t release enough heat. If you can’t find the problem, you can try checking the compressor’s start relay.
If the temperature of your Whirlpool fridge freezer is too high, or too low, or it is not preserving the right temperature, the problem may lie elsewhere. Check the thermostat with the manufacturer’s manual, and make sure the readings are correct. Sometimes, the problem may occur because you accidentally hit the temperature button.
The thermostat is a crucial component in a fridge. Without it, the fridge won’t be able to reach the desired temperature. This failure can cause the fridge to run too hot or too cold, or even not at all.
Frozen evaporator coils
Frozen evaporator coils are a major cause of freezer problems. Frozen coils will not allow the freezer to properly freeze food, and they can cause a refrigerator to stop working properly. In order to diagnose the problem, you should use a multimeter and look for a current running through the evaporator coil.
First, remove the panel cover to access the freezer. Once you have access to the panel, pull downward to remove it. The evaporator fan motor will be located above the evaporator coils. Make sure that you remove the panel covering the temperature control thermostat. You should remove the insulator block that covers the thermostat and disconnect it from the wires. Next, remove the rear access panel. You can also pull out the insulator block to access the evaporator coils.
Frozen evaporator coils may be the result of a malfunctioning thermostat or control board. The thermostat keeps the internal freezer temperature low while the thermistor regulates the power supply to the compressor and condenser fan.
A damaged capacitor will also prevent your refrigerator from working properly. Keeping these components clean can prevent this problem.