Why is My Whirlpool Mini Fridge With Freezer Not Getting Cold?

whirlpool mini fridge with freezer not getting cold

If your Whirlpool mini fridge with freezer isn’t getting cold, there are a few things you can do to fix it. These include cleaning out the coils with a dry brush or vacuuming. You can purchase a dry brush from a grocery store or online. Also, make sure the door seal is properly sealed. If it’s leaking air, this can cause the fridge to lose cold air.

faulty main control board

If the freezer in your refrigerator is not getting cold, this could be a sign of a faulty main control board. These boards collect sensor signals from the refrigerator’s compressor, door, and fan motors to regulate temperature and fan speed. When the board is malfunctioning, your refrigerator will show signs ranging from erratic behavior to complete failure. These boards are susceptible to power surges and static electricity.

First, check the defrost timer. If it works, it should turn on the heater switch. If it does not, replace it. If the problem persists, you may need to replace the entire mini fridge. If you notice that the freezer is freezing over, you may need to replace the compressor.

If this is not the case, your mini fridge might have a faulty main control board. You can replace the board yourself, but if it still does not get cold, it’s best to purchase a new mini fridge.

clogged condenser coils

If the freezer does not get cold, it may be due to clogged condenser coils. These coils are located on the bottom of the fridge and circulate air across them. Mice and debris can build up in these coils, causing them to be clogged. To clean them, use a dry brush and vacuum the clogged areas.

To access the condenser coils, you can either open the refrigerator and remove the grille or pull it away from the wall. Some newer models have internal coils. To access them, you may need to remove the grille by unscrewing or popping out snaps. Next, use a vacuum cleaner to remove most of the buildup. You can also use a brush or wipe cloth to remove any remaining dirt and debris. After cleaning the coils, you will want to restore power to the refrigerator.

A dirty condenser coil will result in poor cooling, and will cause the compressor to overcompensate and retain heat instead of dissipating heat. Other causes of refrigerator not getting cold include malfunctioning internal components. In particular, the evaporator fan may be faulty. It can become clogged or bent, which will prevent air from flowing through it effectively. If the fan is bent, it will need to be replaced.

faulty damper control assembly

If you’re having trouble getting your freezer to get cold, you may have a faulty damper control assembly. This device controls how much cold air passes from the freezer to the refrigerator. When the damper control assembly breaks, the cold air can’t get through. To fix this issue, you’ll need to replace the damper. Fortunately, replacing this part is an easy DIY job.

First, you need to locate the damper. This is the small door located between the fresh food and freezer compartments. It opens and closes based on temperature readings from a thermistor. Check the damper assembly for damage and replace it if necessary.

Secondly, you may need to replace the condenser. This component allows the refrigerator to cool and store food properly. When it fails to work properly, your food will spoil sooner than normal. In some cases, this may be caused by a broken water filter head or a cracked housing. In other cases, the faulty defrost heater assembly is to blame.

faulty compressor

If the freezer in your mini fridge isn’t getting cold, the problem could be caused by a faulty compressor. A faulty compressor can cause the refrigerator’s temperature to fall dangerously low. It’s best to replace the entire refrigerator if this problem persists. A faulty compressor can also lead to the freezer getting frosted over. To diagnose a faulty compressor, first check for the compressor itself. It should emit a clicking sound or be unresponsive to touch.

The compressor is the most important part of a refrigerator. If the compressor isn’t getting cold, check the other parts of the appliance. You can use a multimeter to test the electrical pins on the compressor’s side. If they aren’t working, you should contact a licensed repair technician. If you’re confident in your repair skills, you can repair your refrigerator yourself.

A faulty compressor is usually easy to diagnose if the refrigerator has a sealed system. Faulty compressors can be caused by a faulty temperature thermostat, which sends power to the compressor when it’s above a certain temperature. However, thermostats are expensive and can be hard to wire into a mini fridge.

Available for Amazon Prime